Severity: Notice
Message: Only variable references should be returned by reference
Filename: core/Common.php
Line Number: 257
Measurement Range: | Voltmeter: 0 – 120% Float Voltage: 2.00 V/C to 2.50 V/C Equalize Voltage: 2.00 V/C to 2.50 V/C High DC Voltage Alarm: 1.00 V/C to 2.70 V/C Low DC Voltage Alarm: 1.00 V/C to 2.50 V/C End of Discharge Voltage Alarm: 1.00 V/C to 2.00 V/C |
---|---|
Alarm Relay: | Max Switching Voltage: 150 VDC, 125 VAC Max. Switching Power: 30 WDC, 60 VA AC Max. Switching Current: 2.0 A Max. Carry Current: 2.0 A |
Mounting: | Wall, floor, shelf, EIA 19-inch rack (rear) |
Output Current Limitation: | Adjustable 0 – 110% |
Output Transient Response & Recovery: | 20 – 100% load charge, with battery connected, does not exceed ± 6%. Does not activate high voltage alarm |
Output Ripple & Electrical Noise: | Standard filtering on battery:
|
Current Ratings: | Reverse Current from Battery: Less than 90 mA |
Voltage Regulation: | VAC +10%, -12%: ± 0.25% 0 – 100% Load: ± 0.25% Temp. 32 – 105ºF (0 – 40ºC): ± 0.25% Freq. 50 – 60 Hz ± 3 Hz: ± 0.25% |
Operating Environment: | Operating Temperature: 32 – 105ºF (0 – 40ºC) Elevation: 1000 m (3000 ft) Relative Humidity: 0 – 95% |
Dimensions: | By Chassis Type: S1: 483 x 435 x 454 mm (19 x 17 x 18 in) S2: 483 x 657 x 454 mm (19 x 26 x 18 in) S3: 483 x 902 x 456 mm (19 x 35 x 18 in) |
Audible Noise: | Less tan 62 dB (A) |
The BC-1000 is a stationary float battery charger designed for use in utility, switchgear, and other industrial environments. Nominal ratings include models at 24, 48, or 130 volts DC and 6 to 50 amps DC. Built-in alarms are included for high DC voltage, low DC voltage, positive and negative ground fault, and end of discharge. The unit has digital controls and an LCD display. A number of safety features are included such as wire protection on all field terminals and full AC input and DC output protection. All BC-1000 units include a standard 5-year warranty.
Related Products